Audio Note Tonearms are precision engineered to the highest standards, pushing the boundaries of performance, design and quality.

Our tonearms are manufactured in a state of the art machining facility located in Austria. We don’t use parts manufactured by any other company for our new tonearms; every single piece is custom designed and manufactured by us and for us.

Be sure to also view our range of high-performance Turntables.

Audio Note Tonearms

We see you are on mobile – Please select a model below, tap a tab and scroll down slightly to view the details of the model.

BROWSE TONE ARMS

Arm One/II

When we decided to develop a new range of budget to mid priced tonearms to replace our long lived and loved ARM-One, Two and Three, we obviously had high hopes and expectations for the new design.

We are extremely pleased to announce that the new Version II models have exceeded even our high standards. Ladies and Gentlemen, we give you the Audio Note (UK) ARM-One/II.

Product details

Completely redesigned

We needed an arm that could be accommodated by not only our own range of turntables, but also by the many designs that were cut for the classic single hole ‘Rega’ mounting that has dominated the industry for so many years.

Yet at the same time, we needed something that would truly push the boundaries of performance, design and quality, not only from a build perspective but also from the vitally important sound quality perspective also.

This would require a complete rethink of many of the design criteria, and a level of engineering precision and quality that is rarely seen in the world of HiFi.

Precision Engineering

All of the new arms are manufactured in a state of the art machining facility located in Austria. We don’t use parts manufactured by any other company for our new arms; every single piece is custom designed and manufactured by us and for us.

This was the only way we could guarantee to get the results we were aiming for.

Many people thought we were crazy to contemplate such an undertaking, especially considering the relatively modest prices we wanted to offer the new arms for, but such things have never worried us in the past, so why should they now! It took us over a year of painstaking prototyping, testing, redesigning and re-prototyping to finalise the design… and the results truly astonishing.

Tapered Armtube

The new arms all share the same construction, based around an armtube that is machined from a single billet of high-grade aluminium. It is tapered both internally and externally, which reduces overall mass and also increases stiffness.

The structural rigidity of this design allows the new arms to work with almost any design of cartridge, regardless of weight or compliance. From the lightest tracking moving magnet right up to our own IO models, the new arms allow the cartridge to track superbly, minimising noise and maximising music.

Bias adjustment is achieved via the classic ‘falling weight’ method. We found this to be by far the most easy to adjust and reliable method of bias adjustment.

The vertical and horizontal bearings are not the usual ‘ball racer’ type. Instead we use a rarely seen ‘captured unipivot’ arrangement, which provides significantly superior performance to any conventional arrangement.

As discussed above, we chose to stay with the mounting system used on our earlier generation of arms. But for the new models, we also introduced a method of adjusting the arm height via a threaded collar and locking nut, allowing the stylus rake angle to be precisely adjusted.

Copper inside and out

The Arm One/II uses our own high purity copper wire inside the armtube, and our own AN-A cable from the arm base to the phono plugs.

Technical Specifications

LENGTH
9 inches
WIRING 99.99% pure Copper
CABLE
AN-A Copper Interconnect, AN GP RCA Plugs
SPINDLE TO PIVOT DISTANCE 222mm
MOUNTING TYPE Single armboard hole, 23mm diameter
NOTE Due to Audio Note (UK)’s ongoing research and development program, specifications are subject to change without notice.

Arm Two/II

When we decided to develop a new range of budget to mid priced tonearms to replace our long lived and loved ARM-One, Two and Three, we obviously had high hopes and expectations for the new design.

We are extremely pleased to announce that the new Version II models have exceeded even our high standards. Ladies and Gentlemen, we give you the Audio Note (UK) ARM-Two/II.

Product details

Completely redesigned

We needed an arm that could be accommodated by not only our own range of turntables, but also by the many designs that were cut for the classic single hole ‘Rega’ mounting that has dominated the industry for so many years. Yet at the same time, we needed something that would truly push the boundaries of performance, design and quality, not only from a build perspective but also from the vitally important sound quality perspective also.

This would require a complete rethink of many of the design criteria, and a level of engineering precision and quality that is rarely seen in the world of HiFi.

Precision Engineering

All of the new arms are manufactured in a state of the art machining facility located in Austria. We don’t use parts manufactured by any other company for our new arms; every single piece is custom designed and manufactured by us and for us.

This was the only way we could guarantee to get the results we were aiming for. Many people thought we were crazy to contemplate such an undertaking, especially considering the relatively modest prices we wanted to offer the new arms for, but such things have never worried us in the past, so why should they now! It took us over a year of painstaking prototyping, testing, redesigning and re-prototyping to finalise the design… and the results truly astonishing.

Tapered Armtube

The new arms all share the same construction, based around an armtube that is machined from a single billet of high-grade aluminium. It is tapered both internally and externally, which reduces overall mass and also increases stiffness.

The structural rigidity of this design allows the new arms to work with almost any design of cartridge, regardless of weight or compliance. From the lightest tracking moving magnet right up to our own IO models, the new arms allow the cartridge to track superbly, minimising noise and maximising music.

Bias adjustment is achieved via the classic ‘falling weight’ method. We found this to be by far the most easy to adjust and reliable method of bias adjustment.

The vertical and horizontal bearings are not the usual ‘ball racer’ type. Instead we use a rarely seen ‘captured unipivot’ arrangement, which provides significantly superior performance to any conventional arrangement.

As discussed above, we chose to stay with the mounting system used on our earlier generation of arms. But for the new models, we also introduced a method of adjusting the arm height via a threaded collar and locking nut, allowing the stylus rake angle to be precisely adjusted.

Silver inside and out

The Arm Two/II uses our own high purity Silver Litz wire inside the armtube, and our own AN-V silver cable from the arm base to the phono plugs.

Technical Specifications

LENGTH
9 inches
WIRING 99.99% pure Copper
CABLE
AN-V Silver Interconnect, AN GP RCA Plugs
SPINDLE TO PIVOT DISTANCE 222mm
MOUNTING TYPE Single armboard hole, 23mm diameter
NOTE Due to Audio Note (UK)’s ongoing research and development program, specifications are subject to change without notice.

ARM-Three/II

When we decided to develop a new range of budget to mid priced tonearms to replace our long lived and loved ARM-One, Two and Three, we obviously had high hopes and expectations for the new design.

We are extremely pleased to announce that the new Version II models have exceeded even our high standards. Ladies and Gentlemen, we give you the Audio Note (UK) ARM-Three/II.

Product details

Completely redesigned

We needed an arm that could be accommodated by not only our own range of turntables, but also by the many designs that were cut for the classic single hole ‘Rega’ mounting that has dominated the industry for so many years.

Yet at the same time, we needed something that would truly push the boundaries of performance, design and quality, not only from a build perspective but also from the vitally important sound quality perspective also. This would require a complete rethink of many of the design criteria, and a level of engineering precision and quality that is rarely seen in the world of HiFi.

Precision Engineering

All of the new arms are manufactured in a state of the art machining facility located in Austria. We don’t use parts manufactured by any other company for our new arms; every single piece is custom designed and manufactured by us and for us. This was the only way we could guarantee to get the results we were aiming for.

Many people thought we were crazy to contemplate such an undertaking, especially considering the relatively modest prices we wanted to offer the new arms for, but such things have never worried us in the past, so why should they now! It took us over a year of painstaking prototyping, testing, redesigning and re-prototyping to finalise the design… and the results truly astonishing.

Tapered Armtube

The new arms all share the same construction, based around an armtube that is machined from a single billet of high-grade aluminium. It is tapered both internally and externally, which reduces overall mass and also increases stiffness.

The structural rigidity of this design allows the new arms to work with almost any design of cartridge, regardless of weight or compliance. From the lightest tracking moving magnet right up to our own IO models, the new arms allow the cartridge to track superbly, minimising noise and maximising music.

Bias adjustment is achieved via the classic ‘falling weight’ method. We found this to be by far the most easy to adjust and reliable method of bias adjustment.

The vertical and horizontal bearings are not the usual ‘ball racer’ type. Instead we use a rarely seen ‘captured unipivot’ arrangement, which provides significantly superior performance to any conventional arrangement.

As discussed above, we chose to stay with the mounting system used on our earlier generation of arms. But for the new models, we also introduced a method of adjusting the arm height via a threaded collar and locking nut, allowing the stylus rake angle to be precisely adjusted.

Silver inside and out

The Arm Three/II uses our own high purity Silver Litz wire inside the armtube, and our own AN-Vx silver cable from the arm base to the phono plugs.

Technical Specifications

LENGTH
9 inches
WIRING 99.99% pure Copper
CABLE
AN-Vx Silver Interconnect, AN GP RCA Plugs
SPINDLE TO PIVOT DISTANCE 222mm
MOUNTING TYPE Single armboard hole, 23mm diameter
NOTE Due to Audio Note (UK)’s ongoing research and development program, specifications are subject to change without notice.

Join Our Newsletter!

Never miss a special offer or new arrival.

Discover Our Product Range

Amplification

For all your sources

Analogue

Turntables & Accessories

Digital

The precision of reality

Loudspeakers

Purity is simplicity

Cables

The precision of reality

Valves

The precision of reality